The Allison HT700 Electronic series of gearboxes represents the first generation of electronic transmissions, which replaced the previous hydraulic automatic transmissions of the same series. These gearboxes are utilized in mining trucks, telescopic cranes, and trucks designed for on-highway use. They can be configured with 3-speed, 4-speed, or 5-speed options and feature a speed sensor at the output of the transmission.
The Allison 3000-4000 WTEC III series of gearboxes are used in mining trucks, telescopic cranes, and regular trucks, and they are particularly popular in waste management vehicles used by many municipalities in the country. These gearboxes feature 6 speeds and are equipped with 3 speed sensors, as well as a level and pressure sensor.
The Allison CLBT 5000-6000-8000 series of gearboxes, both the first-generation C.E.C.1 electronic and the second-generation C.E.C.2 electronic, are used in mining trucks and are considered “off-highway” by the factory. They feature 6 speeds, with the first-generation having 1 speed sensor and the second-generation having 3 speed sensors. After conducting research, it was found that the wiring of the second generation covered that of the first generation, allowing us to have only one wire harness for both generations of electronics.
The Allison CLBT 5000-6000-8000 Manual Electric series of gearboxes represents the factory’s first attempt to transition from mechanical control (with levers and gears) to electric control of the transmission. They are used in mining trucks, featuring 6 speeds. They do not have a speed sensor, and the operator must manually shift gears using an electric gear selector.
The DANA TE17000 series of gearboxes are primarily used in container handler machines. They feature 3 forward speeds, 3 reverse speeds, and the second generation is equipped with 4 speed sensors.
The DANA T16000 series of gearboxes are primarily used in backhoe loaders. They feature 4 forward speeds, 4 reverse speeds, and an option for four-wheel drive. They are equipped with 1 speed sensor.
The DANA TE10000 series of gearboxes are primarily used in forklifts with a lifting capacity of 10 to 15 tons. They feature 3 forward speeds, 3 reverse speeds, and 3 speed sensors.
The DANA TE27000 series of gearboxes are primarily used in container handler machines. They feature 4 forward speeds, 4 reverse speeds, and 3 speed sensors.
The DANA T34000 and T36000 series of gearboxes are primarily used in container handler machines. They have 3 or 4 forward speeds, 3 or 4 reverse speeds, and 1 speed sensor.
The ZF HP500, HP590, and HP600 series of transmissions are primarily used in urban and intercity buses, articulated dumpers up to 25 tons, and telescopic cranes. They feature 4, 5, or 6 forward speeds and 2 speed sensors. This represents the first generation of these transmissions, which was highly successful and had a significant global market penetration.
Wire harness for ZF HP Ecomat 2 transmissions. ZF HP502, HP592, and HP602 series transmissions are primarily used in urban and intercity buses, as well as telescopic cranes. They have 4, 5, or 6 forward speeds and 3 rotational speed sensors. This represents the second generation of these transmissions, which also have a significant presence in the global market.
ZF Ecolife transmissions are primarily used in urban and intercity buses, as well as telescopic cranes. They feature 4, 5, or 6 forward speeds and 3 speed sensors. This is the most modern generation of ZF transmissions, also with significant market penetration worldwide.
The ZF WG series transmissions, such as WG190, WG260, and WG310, utilize the same generation of electronics with the EST-37 code. They feature 4, 5, or 6 forward speeds, up to 3 reverse speeds, and 4 speed sensors. These transmissions are used in construction machinery, such as loaders and telescopic cranes.
The VOLVO HTE and HTL series transmissions, such as HTE110, HTE120, HTE200, HTE300, HTL200, and HTL300, utilize the same generation of electronics. They feature 3 or 4 forward speeds, 3 or 4 reverse speeds, and 3 speed sensors. These transmissions are used in all Volvo CE wheel loaders.
The VOLVO PT series transmissions, such as PT1560, PT1760, and PT1860, utilize the same generation of electronics. They have 6 forward speeds, 2 reverse speeds, and up to 3 speed sensors. These transmissions are used in all Volvo CE articulated trucks weighing over 30 tons.
The wire harness for the VOLVO L120H loader is designed and engineered to provide fast and reliable connections while minimizing margin for error. It is an optimized construction that ensures high performance.
The VOITH DIWA 3 series of transmissions are primarily used in urban and intercity buses. They feature 4 forward speeds and 3 rotation sensors. This is the first generation of these transmissions, which has been particularly successful and widely adopted in the global market.
The wire harness is compatible with a range of transmissions utilized in heavy machinery manufactured by the aforementioned company.